Models in Stock and Ready to Ship:
2016-2019: GTX Ltd 300
2016-2019: RXTX 300
2016-2019: RXPX 300
All other SeaDoo models will take 10 business days for delivery after placement of your order.
This dual impeller is designed for the Flyboard and fits the stock SeaDoo pump. Main drive and inducer specifications vary depending on the model of your SeaDoo. This impeller upgrade has been tested and works well with all hydroflight devices.
For the SeaDoo 300 models, a 4-Blade inducer is recommended. The 6/14 main drive with 4-Blade Inducer has been the choice impeller for hydroflight competitions on the SeaDoo 300 models.
In the jet propelled water sports industry, these dual impellers have been found to produce more thrust and increase the SeaDoo’s stock pump efficiency. When used with the Flyboard, the dual impeller reduces some vibration and increases height.
These dual impellers have been found to work great with jet propelled water sports making the stock pump more efficient. This is a high quality performance part manufactured by Skat-Trak and sold by PowerFly Products.
We offer installation at our showroom in Melbourne, Florida. If you are purchasing this product and do not have mechanical knowledge, we recommend taking your SeaDoo to a watercraft mechanic for installation of the dual impeller. If you can install this yourself, you will need the installation tools which are sold separately. (Note some watercraft mechanics may not have the proper installation tools. Please check with them and ask if they have the tools specifically made by Skat-Trak.)
To order, please select your SeaDoo year and model from our drop down menu. For the SeaDoo models requiring the exact year upon ordering, the reason is in 2008, SeaDoo changed the way the hub was machined on the main drive mid year. To check the specific hub you have, you will need you to remove the nose cone from the pump and see if you have either: a flat end of the shaft with a 12mm hex OR a large 30mm lock nut.
We have limited quantities in stock and each dual impeller is custom made. Shipment may be delayed depending on availability from 7-12 business days.
If you plan on installing the dual impeller yourself, you will need the install hex tool 1.25″ for installing and removing the inducer. You will also need the main drive 28mm or 23 mm spline wrench for removing the stock impeller and installing the Skat-Trak Main Drive. A 1/2 inch allen / 1/2 inch drive is needed to use the spline wrench. These are special tools you can add onto your order now.